Mercurial > lxmppd-hg-xmllex / changeset

--- a/Makefile	Sat Nov 29 02:23:48 2008 +0000
+++ b/Makefile	Sat Nov 29 02:28:00 2008 +0000
@@ -18,7 +18,7 @@
 	install -m644 net/* $(SOURCE)/net
 	install -m644 util/* $(SOURCE)/util
 	install -m644 plugins/* $(MODULES)
-	install -m644 prosody.cfg.lua $(CONFIG)
+	install -m644 prosody.cfg.lua.dist $(CONFIG)/prosody.cfg.lua
 	$(MAKE) install -C util-src
 
 clean:

--- a/lxmppd.cfg.lua.dist	Sat Nov 29 02:23:48 2008 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,74 +0,0 @@
--- lxmppd Example Configuration File 
--- 
--- If it wasn't already obvious, -- starts a comment, and all 
--- text after it is ignored by lxmppd.
---
--- The config is split into sections, a global section, and one 
--- for each defined host that we serve. You can add as many host 
--- sections as you like.
---
--- Lists are written { "like", "this", "one" } 
--- Lists can also be of { 1, 2, 3 } numbers, etc. 
--- Either commas, or semi-colons; may be used
--- as seperators.
---
--- A table is a list of values, except each value has a name. An 
--- example would be:
---
--- logging = { type = "html", directory = "/var/logs", rotate = "daily" }
---
--- Whitespace (that is tabs, spaces, line breaks) is insignificant, so can 
--- be placed anywhere
--- that 	you deem fitting. Youcouldalsoremoveitentirely,butforobviousrea
---sonsIdon'trecommendit.
---
--- Tip: You can check that the syntax of this file is correct when you have finished
--- by running: luac -p lxmppd.cfg.lua
--- If there are any errors, it will let you know what and where they are, otherwise it 
--- will keep quiet.
---
--- The only thing left to do is rename this file to remove the .dist ending, and fill in the 
--- blanks. Good luck, and happy Jabbering!
-
--- Global settings go in this section
-Host "*"
-	
-	-- This is the list of modules lxmppd will load on startup.
-	-- It looks for plugins/mod_modulename.lua, so make sure that exists too.
-	modules_enabled = {
-				"saslauth"; -- Authentication for clients and servers. Recommended if you want to log in.
-				"legacyauth"; -- Legacy authentication. Only used by some old clients and bots.
-				"roster"; -- Allow users to have a roster. Recommended ;)
-				"register"; -- Allow users to register on this server using a client
-				"tls"; -- Add support for secure TLS on c2s/s2s connections
-				"vcard"; -- Allow users to set vCards
-				"private"; -- Private XML storage (for room bookmarks, etc.)
-				"version"; -- Replies to server version requests
-				"dialback"; -- s2s dialback support
-			  };
-	
-	-- These are the SSL/TLS-related settings. If you don't want
-	-- to use SSL/TLS, you may comment or remove this
-	ssl = { 
-		key = "certs/server.key";
-		certificate = "certs/server.crt";
-		}
-
--- This allows clients to connect to localhost. No harm in it.
-Host "localhost"
-
--- Section for example.com
--- (replace example.com with your domain name)
-Host "example.com"
-	-- Assign this host a certificate for TLS, otherwise it would use the one
-	-- set in the global section (if any).
-	-- Note that old-style SSL on port 5223 only supports one certificate, and will always
-	-- use the global one.
-	ssl = { 
-		key = "certs/example.com.key";
-		certificate = "certs/example.com.crt";
-		}
-
-Host "example.org"
-	enabled = false -- This will disable the host, preserving the config, but denying connections
-	

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/prosody.cfg.lua.dist	Sat Nov 29 02:28:00 2008 +0000
@@ -0,0 +1,73 @@
+-- Prosody Example Configuration File 
+-- 
+-- If it wasn't already obvious, -- starts a comment, and all 
+-- text after it is ignored by Prosody.
+--
+-- The config is split into sections, a global section, and one 
+-- for each defined host that we serve. You can add as many host 
+-- sections as you like.
+--
+-- Lists are written { "like", "this", "one" } 
+-- Lists can also be of { 1, 2, 3 } numbers, etc. 
+-- Either commas, or semi-colons; may be used
+-- as seperators.
+--
+-- A table is a list of values, except each value has a name. An 
+-- example would be:
+--
+-- logging = { type = "html", directory = "/var/logs", rotate = "daily" }
+--
+-- Whitespace (that is tabs, spaces, line breaks) is insignificant, so can 
+-- be placed anywhere
+-- that 	you deem fitting. Youcouldalsoremoveitentirely,butforobviousrea
+--sonsIdon'trecommendit.
+--
+-- Tip: You can check that the syntax of this file is correct when you have finished
+-- by running: luac -p prosody.cfg.lua
+-- If there are any errors, it will let you know what and where they are, otherwise it 
+-- will keep quiet.
+--
+-- The only thing left to do is rename this file to remove the .dist ending, and fill in the 
+-- blanks. Good luck, and happy Jabbering!
+
+-- Global settings go in this section
+Host "*"
+	
+	-- This is the list of modules Prosody will load on startup.
+	-- It looks for mod_modulename.lua in the plugins folder, so make sure that exists too.
+	modules_enabled = {
+				"saslauth"; -- Authentication for clients and servers. Recommended if you want to log in.
+				"legacyauth"; -- Legacy authentication. Only used by some old clients and bots.
+				"roster"; -- Allow users to have a roster. Recommended ;)
+				"register"; -- Allow users to register on this server using a client
+				"tls"; -- Add support for secure TLS on c2s/s2s connections
+				"vcard"; -- Allow users to set vCards
+				"private"; -- Private XML storage (for room bookmarks, etc.)
+				"version"; -- Replies to server version requests
+				"dialback"; -- s2s dialback support
+			  };
+	
+	-- These are the SSL/TLS-related settings. If you don't want
+	-- to use SSL/TLS, you may comment or remove this
+	ssl = { 
+		key = "certs/server.key";
+		certificate = "certs/server.crt";
+		}
+
+-- This allows clients to connect to localhost. No harm in it.
+Host "localhost"
+
+-- Section for example.com
+-- (replace example.com with your domain name)
+Host "example.com"
+	-- Assign this host a certificate for TLS, otherwise it would use the one
+	-- set in the global section (if any).
+	-- Note that old-style SSL on port 5223 only supports one certificate, and will always
+	-- use the global one.
+	ssl = { 
+		key = "certs/example.com.key";
+		certificate = "certs/example.com.crt";
+		}
+
+	enabled = false -- This will disable the host, preserving the config, but denying connections
+